Explorer 4WD V8-4.6L VIN W (2002)
14.
Using the special tools, fill the transmission with clean automatic transmission fluid (Figure 12).
15.
Remove special tool 303-D104.
16.
Allow the fluid to drain. Wait approximately 1 minute. When the fluid comes out as a thin stream or drip, the fluid is at the correct level. If no
fluid drains from the plug, keep adding fluid in 0.24 L (1/2 pint) increments until the fluid starts to drain from the plug (Figure 13).
17.
Remove the special tool from the pan (Figure 10).