Explorer 4WD V8-4.6L VIN W (2002)
18.
Reinstall the small (center) fluid level indicating plug using a 3/16 inch Allen key. Torque to 10 N.m (89 lb-in) (Figure 14).
19.
Remove special tool 205-025 level gauge (if used).
20.
Lower the vehicle.
21.
Remove the WDS.
22.
Check the operation of the transmission by moving the range selector lever slowly through each gear, stopping in each position and allowing the
transmission to engage.
23.
Raise and support the vehicle with the engine running and check for any leaks. For additional information, refer to Workshop Manual Section
100-02.
24.
Lower the vehicle and shut off the engine.
