Explorer 4WD V8-4.6L VIN W (2002)
Install diagnostic equipment and monitor the Transmission Fluid Temperature (TFT).
Warm the transmission fluid to at least 130° F (54° C as indicated by the TFT).
^
Perform five (5) engagements from Park to Reverse. Each engagement must be 5 seconds apart
^
Perform five (5) engagements from Drive to Reverse. Each engagement must be 5 seconds apart
^
Perform five (5) engagements from Reverse to Drive. Each engagement must be 5 seconds apart
^
Perform five (5) engagements from Neutral to Drive. Each engagement must be 5 seconds apart.
NOTE
ALL OF THESE ENGAGEMENTS MUST BE PERFORMED IN ORDER FOR THE ENGAGEMENT PRESSURES TO PROPERLY ADAPT
WITH THE NEW CALIBRATION.
Verify repair. If the condition is not corrected, continue with normal diagnostics and repair per the Workshop Manual.
Obtain an Authorized Modifications Decal (FPS 8262 - obtainable through DOES II, 25/pkg) and list the date, dealer number, and summary of
modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized
Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
021805A
Verify Concern If Present
1.7 Hrs.
Reprogram The PCM To
The Lastest Level.
Removal Of PCM To
Retrieve Tear Tag
Information And Relearning
Of Transmission Adaptive
Strategy Included.
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECAL
42
OASIS CODES: 501000, 502000
