Explorer 4WD V8-4.6L VIN W (2002)
1. Install new O-ring seals on the solenoid body connector. Lubricate the O-ring seals with clean automatic transmission fluid.
2. CAUTION: Inspect the transmission case bore to make sure it is free of foreign material and not damaged. If damaged, a transmission leak may
occur.
Install the solenoid body. Tighten the bolts in sequence shown.
3. CAUTION: Lubricate the fluid filter seals with clean automatic transmission fluid or they may be damaged.
NOTE: Make sure that the fluid filter seals are correctly seated on the filter.
Lubricate the seals and install the transmission fluid filter.
4. NOTE: The transmission fluid pan gasket is reusable, clean and inspect for damage, if not damaged, the gasket should be reused.
Install the transmission fluid pan and gasket and loosely install the screws.
