Explorer 4WD V8-4.6L VIN W (2002)
6. Disconnect turbine shaft speed (TSS) sensor electrical connector.
7. Remove TSS sensor.
1
Remove the TSS sensor screw.
2
Remove the TSS sensor from the transmission.
8. Inspect the TSS sensor O-ring for damage. If damaged, install a new O-ring.
Installation
All vehicles
1. Inspect and lubricate O-ring with petroleum jelly.
1
Install the TSS sensor into the transmission.
2
Tighten TSS sensor screw.
2. Connect TSS sensor electrical connector.