Explorer 4WD V8-4.6L VIN W (2002)
21. Remove the RH side C-pillar trim panel clips.
22. Position the RH side C-pillar trim panel out of the way.
-
Pull the lower portion of the trim panel outward to release the lower tab.
-
Pull the trim panel downward to release the upper tabs. Slide the trim panel down the safety belt, out of the way.
Vehicles with safety canopies
NOTE: Once the weatherstrip is lowered, if retaining clips are not present in the doorjamb at the C-pillar pinch weld, the vehicle will be equipped
with side air curtains
23. Remove the RH C-pillar trim panel. Pull out and release the retaining Clips.
2. Pull out and release the retainer.
3. Lower the door opening weatherstrip, slide the C-pillar trim panel up, releasing the retainers and remove the C-pillar trim panel.
Vehicles with side air curtains or safety canopies
24. Disconnect the RH side air curtain/safety canopy electrical connector.
