Explorer 4WD V8-4.6L VIN W (2002)
Install the passenger air bag module into the instrument panel.
-
Align and install the passenger air bag module retaining clips and studs to the instrument panel.
3. When all the retaining clips and studs are correctly aligned and installed to the instrument panel, the passenger air bag trim cover will sit flush with
the rest of the instrument panel.
4. CAUTION: The retaining nuts of the passenger air bag module must be tightened in the order described.
Install the three passenger air bag module nuts.
1. NOTE: This retainer could not be shown at this stage of assembly.
Install the nut.
-
Follow up between the instrument panel support flanges and locate the passenger air bag module retaining stud.
2. Install the nuts.
Vehicles built up to 03/2002
5. Connect the passenger air bag module electrical connector.
Vehicles built 03/2002 onward
