Explorer 4WD V8-4.6L VIN W (2002)
Position the A-pillar tether cord. Install the bolt.
11. Position the side air curtain/safety canopy into the front ramp.
1. Position the top of the side air curtain/safety canopy into the front ramp upper retaining clips.
2. Rotate the side air curtain/safety canopy down, engaging the front ramp lower retainers.
Vehicles with a safety canopy
12. Engage the rear tether bracket assembly hook to the C-pillar sheet metal.
13. With the rear tether bracket assembly positioned to the C-pillar, install the bolts.
Vehicles with a moonroof
14. Position the moonroof drain tube. Install the pin-type retainers.
All vehicles
15. Remove the restraint system diagnostic tool from the side air curtain/safety canopy electrical connector.
