Explorer 4WD V8-4.6L VIN W (2002)
25. Remove the restraint system diagnostic tools from the clockspring electrical connector at the top of the steering column.
26. Position the driver air bag module to the steering wheel.
1. Connect the horn switch electrical connector.
2. CAUTION: The clockspring electrical connectors are unique and cannot be reversed when connected to the driver air bag module.
Match the electrical connector key to the keyway in the driver air bag module. Do not force the electrical connectors into the driver
air bag module.
Connect the driver air bag module electrical connectors as noted during removal.
3. Position the driver air bag module to the steering wheel.
Vehicles built up to 03/2002
27. NOTE: Make sure the negative battery cable is still disconnected before continuing with the installation portion of this procedure.
Remove the restraint system diagnostic tool from the clockspring electrical connector at the top of the steering column.
28. Position the driver air bag module to the steering wheel.
1. Connect the driver air bag module electrical connector.
