Explorer 4WD V8-4.6L VIN W (2002)
Child Seat Tether Attachment: Service and Repair
REMOVAL
Second row tether anchors
1. Remove the second row child safety seat tether anchor.
1
Pull the carpet back.
2
Remove the bolt.
3
Remove the tether anchor.
NOTE:
^
The second row tether anchors are mounted to the floor pan behind the second row of seats.
^
The right-hand side is shown.
Seven passenger third row tether anchors
2. Remove the rear hatch scuff plate.
1
Remove the weatherstripping around the rear hatch scuff plate.
2
Lift up on the rear hatch scuff plate, releasing the retainers.
3. Remove the third row child safety seat tether anchor.
1
Remove the bolt.
2
Remove the third row child safety seat tether anchor.
INSTALLATION
All vehicles
1. To install, reverse the removal procedure.
