Explorer 4WD V8-4.6L VIN W (2002)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor
Front Wheel Speed Sensor
Material
Removal and Installation
1. Remove the wheel and tire assembly.
2. CAUTION: Do not allow the caliper to hang from the brake hose.
Remove the bolts and position the caliper and support bracket aside.
^
Discard the bolts.
3. NOTE: Match-mark the brake disc and hub.
Remove the brake disc.
4. NOTE: The wheel speed sensor connectors are located in the engine compartment and are secured to the fender aprons.
Disconnect the wheel speed sensor connector.
