Explorer 4WD V8-4.6L VIN W (2002)
307-437 - Adapter, Fluid Level and Fill Plug (Figure 4).
NOTE
LEFT SIDE OF CASE IS SHOWN.
FLUID LEVEL CHECK (Fluid Fill Reference Figure 5)
1.
Using the scan tool (WDS), monitor the transmission fluid temperature (TFT) using PID: TFT.
2.
Start the vehicle.
NOTE
ENGINE IDLE SPEED IS APPROXIMATELY 650 RPM.
3.
Run the engine until the transmission fluid temperature is between 27°C-49°C (80°F-120° F).