Explorer 4WD V8-4.6L VIN W (2002)
10.
Listen for the Torque Converter Clutch buzzing noise. Has the noise disappeared?
^
If yes, continue.
^
If no, follow normal diagnosis as listed in the Workshop Manuals, the Main Control is not the problem.
11.
If the condition exists, drain the transmission fluid from the pan.
NOTE
AN IN-LINE SERVICE FILTER IS NOT REQUIRED TO BE ADDED OR REPLACED FOR THIS ARTICLE.
12.
Replace the Main Control 1L2Z-7A100-CA and Fluid Filter 1L2Z-7A098-AC. Follow the steps listed in the Workshop Manual, In-Vehicle
Service, Main Control Valve Body, to remove and replace.
13.
Verify the condition has been corrected.
14.
Clear all DTCs.
Parts Block
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
012203A
Verify Conditions And
2.6 Hrs.
Replace Transmission
Main Control
DEALER CODING
CONDITION
BASIC PART NO.
CODE
7A100
42
OASIS CODES: 504000, 702000
