Explorer 4WD V8-4.6L VIN W (2002)
3. Assemble the manual valve inner lever and parking lever actuating rod as shown.
4. CAUTION: Align the flats on the manual valve inner lever with the flats on the manual control lever shaft.
Align the flats of the manual inner lever with the flats on the manual control lever shaft. Install the manual valve inner lever and parking lever
actuating rod onto the manual control lever shaft.
5. Install the manual valve inner lever onto the manual shaft and loosely install the nut.
6. CAUTION: Use care not to damage the fluid pan rail surface when installing the retaining pin.
NOTE: Align the manual control lever shaft alignment groove with the manual control lever shaft spring pin bore in the transmission case.
Install the manual control lever shaft spring pin. Tap the manual control lever shaft spring pin into the transmission case.
