Explorer 4WD V8-4.6L VIN W (2002)
23. NOTE: It will be necessary to lift the radiator assembly up off the mounts and set it on the frame in order to separate the AC condenser from the
radiator. Right is shown; left side is similar.
Remove the radiator up off the mount and set it on the frame.
24. Remove the left inner air deflector from the AC condenser.
25. Remove the right inner air deflector from the AC condenser.
26. NOTE: It is not necessary to evacuate the AC system, the AC condenser can remain in the vehicle.
NOTE: It will be necessary to lift the AC condenser up off the lower support. Move the AC condenser toward the front of the vehicle.
Remove the radiator and trans cooler as an assembly and place it on a bench.
27. CAUTION: Do not allow the AC condenser to hang freely or damage to the AC lines could occur.
Using mechanics wire support the AC condenser to the frame.
