ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Transmission Mount, A/T|Specifications|Page 7760 > < Transmission Mount, A/T|Specifications|Page 7758

Explorer 4WD V8-4.6L VIN W (2002)

Page 4
background image

4. Install the LH side crossmember bolts.

5. Install the plastic fuel pump connector cover to the right side of the frame rail.
6. Install the plastic shield on the right side of the crossmember near the fuel tank.

7. NOTE:  The RH side is shown, LH side similar.

Install the two upper crossmember bolts (two on each side).

8. Tighten the rear transmission support nuts.

Transmission Mount, A/T|Specifications|Page 7760 > < Transmission Mount, A/T|Specifications|Page 7758