Explorer 4WD V8-4.6L VIN W (2002)
11.
lnstall the Special Service Tools 307-334 (2 required) on to the main control (Figure 3).
12.
Install a NEW service Separator Plate, install the three (3) screws and tighten to 10 Nm (89 lb-in). Remove the Special Service Tools.
13.
Reinstall the Main Control by continuing to follow the Installation steps listed in the Workshop Manual In-Vehicle Service, Main Control Valve
Body.
PARTS BLOCK
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
012007A
Replace Main Control
1.8 Hrs.
Valve Body And Fluid
Filter
012007B
Replace Main Control
1.9 Hrs.
Valve Body Separator
Plate And Fluid Filter
DEALER CODING
CONDITION
BASIC PART NO.
CODE
7Z490
42
OASIS CODES: 504000, 597997, 702000