Explorer 4WD V8-4.6L VIN W (2002)
5. Install an Nm (inch/pound) torque wrench on the nut and record the torque necessary to maintain rotation of the drive pinion gear through several
revolutions.
6. CAUTION: After removing the nut, discard it. Use a new nut for installation.
Use the special tool to hold the rear axle pinion flange while removing the nut.
7. Index-mark the rear axle pinion flange and drive pinion gear stem to maintain initial balance during installation.
8. Using the special tool, remove the rear axle pinion flange.
