Explorer 4WD V8-4.6L VIN W (2002)
Windshield Washer Pump: Service and Repair
Windshield Washer Pump and Reservoir
WINDSHIELD WASHER PUMP AND RESERVOIR
Removal and Installation
All vehicles
1. Remove the wheel and tire assembly.
2. Remove the secondary fender splash shield.
1. Remove the pin-type retainer.
2. Remove the screws and splash shield.
3. Disconnect the electrical connector.
4. Disconnect the electrical connector.
5. Lower the vehicle on the hoist, refer to Maintenance/Service and Repair.
6. Remove the air cleaner assembly.
7. Remove the air condition (A/C) accumulator to frame bolt.
