ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Windshield Washer Relay > < Windshield Washer Pump and Reservoir|Page 15572
Page 1
background image

Windshield Washer Pump: Service and Repair
Windshield Washer Pump

WINDSHIELD WASHER PUMP

Removal and Installation

1. Raise and support the vehicle.

2. WARNING:  Windshield washer solution contains methanol, which is poisonous. Observe all cautions and warnings indicated on the

label of the container. Failure to follow these instructions may result in personal injury.

CAUTION:  When servicing the windshield washer pump be careful not to damage the rubber grommet.

NOTE:  To prevent spilling windshield washer fluid, position a suitable drain pan before removal.

Remove the windshield washer pump.
1. Disconnect the windshield washer hose and the rear window washer hose.
2. Disconnect the electrical connector.
3. Remove the pump.

3. CAUTION:  Do not operate the windshield washer pump prior to filling the reservoir. Failure to do so may result in premature pump

failure.

To install, reverse the removal procedure.

Windshield Washer Relay > < Windshield Washer Pump and Reservoir|Page 15572