Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
WARNING:
BE SURE TO USE PERSONAL PROTECTIVE EQUIPMENT SUCH AS SAFETY GLASSES AND EQUIPMENT THAT WILL PROTECT
AGAINST PERSONAL INJURY IN THE EVENT OF GLASS BREAKAGE.
CAUTION:
Do not use power tools when working on the glass.
1.
Open the liftgate glass and support the glass with a jack stand positioned under the striker.
2.
Disconnect the liftgate glass support struts from both ends and remove from the vehicle.
3.
Remove the jack stand and carefully close the glass making sure the striker is engaged in the latch.
[NEW]4.
CAUTION: The location of the original glass hinges must be clearly marked on the glass to make sure the new hinges are accurately
positioned and that the glass is properly aligned. Failure to properly align the new hinges to these marks may result in glass shattering.
Using a grease pencil, a non-permanent marker or tape, outline the entire perimeter of the original hinges to mark their exact location on the
glass. See Figure 3.
5.
Open the full liftgate.
