Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
10. WARNING: Any time the safety canopy has deployed, the headliner, and all A, B and C pillar upper trim panels and attaching
hardware must be replaced along with any other damaged components and hardware. Failure to do so may result in personal injury in
the event of a side air curtain deployment.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
Align the RH C-pillar trim panel hook to the opening in the sheet metal.
-
The safety belt shoulder height adjuster and the C-pillar trim panel sliding insert must be at their most upward position of travel to aid
installation.
11. Position the RH C-pillar trim panel.
1
With the hook aligned to the sheet metal, position the top of the C-pillar trim panel to the sheet metal.
-
Make sure the safety belt shoulder height adjuster and the C-pillar trim panel sliding insert are at their most upward position of travel to aid
installation.
2
Align and slide down, engaging the front upper trim panel retainer.
-
The C-pillar trim panel sliding insert circular recess must align to the safety belt guide bolt.
3
Align and push in, engaging the front lower trim panel retainer.
