Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
Item 15: Sun Visor Center Retainer Removal Note
CAUTION: To prevent bending or damaging the headliner, an assistant is required to support the liner while carrying out the remaining
steps.
1. Open the center retainer cover to access the screw.
Item 16: Garment Hook Removal Note
1. CAUTION: To prevent damaging the garment hanger retainer, use a 3/16-inch fiat blade screwdriver to carry out this step.
Remove the second and third row garment hooks.
-
Open the access cover and insert a 3/16-inch flat blade screwdriver into the garment hanger slot and turn 90 degrees so that it engages the
plastic component slot. This spreads the steel attachment clip wings to allow the plastic component to disengage. The clip remains engaged in
the sheet metal.
INSTALLATION
1. Install in the reverse order of removal.
2. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
If equipped, reactivate the supplemental restraint system (SRS).
Item 4: Sun Visor Electrical Connector Installation Note
1. Install new tape around the sun visor wiring harness-to-headliner before installing the visor.
