Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
1. NOTE: If the block cradle gasket is not secured within four minutes of the sealant application, the sealant must be removed and the sealing area
cleaned with metal surface cleaner. Allow the silicone to dry until there is no sign of wetness, or four minutes, whichever is longer. Failure to
follow this procedure can cause future oil leakage.
Apply silicone in the six places shown.
Item Number 12, 13,14,15,16 and 17: Lower Block Cradle and Bolts Installation Note
1. Position the lower block cradle and gasket assembly.
2. Install and hand-tighten the outer bolts and nuts.
