ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 9818 > < Air Bag Disarming and Arming|Page 9816
Page 12
background image

The side impact sensors (if equipped) are located at or near the base of the B-pillars and C-pillars.

To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary
batteries and power supplies (if equipped).

Disconnect the battery ground cable and wait at least one minute.

All vehicles

18. NOTE:  Make sure the battery negative cable is still disconnected before continuing with the reactivation portion of this procedure.

Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.

19. Connect the passenger air bag module electrical connector.
20. Close the glove compartment.

21. Remove the restraint system diagnostic tools from the clockspring electrical connector at the top of the steering column.

Air Bag Disarming and Arming|Page 9818 > < Air Bag Disarming and Arming|Page 9816