Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
2
Pull out and release the retainer.
3
Lower the door opening weatherstrip, slide the C-pillar trim panel up, releasing the retainers and remove the C-pillar trim panel.
19. Disconnect the LH safety canopy electrical connector.
20. Attach the restraint system diagnostic tool to the vehicle harness side of the LH safety canopy electrical connector.
All vehicles
21. Install the RCM fuse F2.19 (10A) to the CJB.
22. Connect the battery ground cable.
Reactivation
WARNING: To reduce the risk of serious personal injury, read and follow all warning, cautions, and noted at the beginning of the
deactivation procedure.
All vehicles
1. Remove the RCM fuse F2.19 (10A) from the CJB.
2. Disconnect the battery ground cable and wait at least 1 minute.
Vehicles with safety canopies
3. Remove the restraint system diagnostic tool from the LH safety canopy vehicle harness electrical connector.
