Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
2. From under the front LH seat, connect the safety belt buckle pretensioner electrical connector.
Vehicles with safety canopies
3. Remove the restraint system diagnostic tool from the LH safety canopy vehicle harness electrical connector.
4. Connect the LH safety canopy electrical connector.
5. WARNING: Any time the safety canopy has deployed, the headliner, and all A, B and. C pillar upper trim panels and attaching
hardware must be replaced along with any other damaged components and hardware. Failure to do so may result in personal injury in
the event of a safety canopy deployment.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
Align the LH C-pillar trim panel hook to the opening in the sheet metal.
^
The safety belt shoulder height adjuster and the C-pillar trim panel sliding insert must be at their most upward position of travel to aid
installation.
