Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
Hose/Line HVAC: Service and Repair
Auxiliary Climate Control
Front Auxiliary Evaporator Outlet and Inlet Line
AUXILIARY EVAPORATOR OUTLET AND INLET LINE - FRONT
REMOVAL
NOTE:
-
Installation of a new accumulator is not required when repairing the air conditioning system except when there is physical evidence of
contamination from a failed A/C compressor or damage to the accumulator.
-
New O-ring seals, lubricated in clean PAG oil, must be installed before reconnecting any A/C fitting which has been disconnected.
1. Position the vehicle on a hoist with the gear selector in NEUTRAL.
2. Recover the refrigerant.
3. Remove the RH running board brackets.