Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
Tire Pressure Sensor: Service and Repair
Tire Pressure Sensor
CAUTION: Make sure to install a new sensor grommet or an air leak can occur.
NOTE: Do not remove the valve stem core to relieve the tire pressure.
1. Remove the wheel and tire assembly.
2. Remove the components in the order indicated in the following illustration and table.
3. To install, reverse the removal procedure.
4. Train the tire pressure sensors.
5. Inflate the tire to the pressure specified on the safety certification sticker located on the driver door jamb.
Item 2: Sensor Retainer Nut Removal Note
1. CAUTION: If the valve stem core has been removed from the valve stem, a new nickel-plated core must be installed. Failure to use a
nickel-plated core will result in corrosion and the possible loss of tire pressure.
NOTE: Release the tire pressure by removing the sensor retaining nut.
