ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Wiring Harness:|05-18-7 > < Restraint System - Air Bag Lamp ON/DTC B2292 Set|Page 7089
Page 1
background image

Wiring Harness: All Technical Service Bulletins
Audio System - Delayed Power When Switched ON

TSB 05-21-7

10/31/05

DELAYED RADIO POWER UP WHEN THE KEY IS 
CYCLED ON

FORD:
2002-2003 Explorer

MERCURY:
2002-2003 Mountaineer

ISSUE
Some 2002-2003 Explorer 4dr and Mountaineer vehicles built after 3/4/2002 equipped with the 3L2T-18C815-FA CDx6-A Audiophile radio may
exhibit a delayed radio power up when the key is cycled on. The concern may last up to 23 seconds.

ACTION
If the concern is verified install a jumper harness and 2004 CD6 Audiophile radio. Refer to the following Service Procedure.

SERVICE PROCEDURE

1.

Remove the radio following the Workshop Manual, Section 415.

2.

Install the jumper harness between the 14401 dash harness and the new 2004 CD6 Audiophile radio.

3.

Install the radio unit per Workshop Manual, Section 415.

NOTE

WHEN INSTALLING THE RADIO, MAKE SURE ALL EXCESS HARNESS IS FED TO THE DRIVERS SIDE, BEHIND THE CLUSTER.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage

OPERATION

DESCRIPTION

TIME

052107A

2002-2003

0.3 Hr.

Explorer/Mountaineer:
Replace The Radio And
Install Jumper Harness (Do
Not Use With 18805b,
18805c)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

18C815

01

OASIS CODES: 207000

Disclaimer

All Technical Service Bulletins for Wiring Harness:|05-18-7 > < Restraint System - Air Bag Lamp ON/DTC B2292 Set|Page 7089