Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
Engine Control Module: Service and Repair
Powertrain Control Module (PCM)
POWERTRAIN CONTROL MODULE (PCM)
REMOVAL
1. NOTE: Refer to Computers and Control Systems for correct worldwide diagnostic system (WDS) hook-up procedure.
Connect the diagnostic tool to the vehicle. Allow the diagnostic tool to identify the vehicle and obtain configuration data.
-
All programmable module information will automatically be retrieved by the WDS.
2. Disconnect the battery ground cable.
3. Remove the glovebox door assembly.
1
Open the glovebox door.
2
Push in on the sides of the glovebox door to release the retainers.
3
Remove the screws.
