Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
DTCs that use fault PIDs do not identify the specific concern. The DTC identifies the component(s) or type of component(s) in which the concern exists.
The next level, fault PIDs, identifies the specific device and fault condition. Fault PIDs are available for both on-demand (active) and continuous
memory (historic or intermittent) DTCs. A scan tool must be used to view the DTCs and their fault PIDs. The table lists those DTCs that are supported
by associated fault PIDs. (Figures 1-5)
VIEWING FAULT PIDS USING SCAN TOOLS WSM Direction to FLAG DTC/View Fault PIDs
The information in viewing fault PIDs in the WSM has evolved over the years as the scan tools have transitioned. Examples of how the WSM may direct
you to view fault PIDs are:
^
FLAG DTC XXXXX/Record All Flagged Faults (2001-2006 WS Ms)
