ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Driver Air Bag Module|Page 8057 > < Driver Air Bag Module|Page 8055
Page 3
background image

1. NOTE:  Make sure the battery negative cable is still disconnected before continuing with the installation portion of this procedure.

Install the components in the order indicated in the illustration and table.

2. Connect the battery ground cable.

3. WARNING:  The restraint system diagnostic tool is for restraint system service only. Remove from vehicle prior to road use. Failure to

remove could result in injury and possible violation of vehicle safety standards.

With the restraint system diagnostic tools still installed at the remaining deployable devices, prove out the supplemental restraint system (SRS).  
See: Air Bag(s) Arming and Disarming/Service and Repair/Prove Out Procedure

4. WARNING:  To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing

Driver Air Bag Module|Page 8057 > < Driver Air Bag Module|Page 8055