Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
1. NOTE: Make sure the battery negative cable is still disconnected before continuing with the installation portion of this procedure.
For vehicles receiving the same safety canopy, position the safety canopy back into the rear ramp.
1
Position the ramp upper retainers around the safety canopy, making sure the retainers are in the safety canopy cover locator cutouts.
2
The safety canopy cover must be located behind the ramp tabs.
2. NOTE: Make sure the battery negative cable is still disconnected before proceeding with the installation portion of this procedure.
With the safety canopy module positioned in the vehicle as shown, angle the rear of the safety canopy module toward the sheet metal. Insert the
deployment canister into the sheet metal opening.
3. Push in on the front and rear ramps engaging the ramp retainers to the sheet metal. An audible click should be heard, indicating that the retainers
have engaged into the sheet metal.