Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
1. The anti-rotation tab must be correctly aligned in the seat frame for correct installation.
Item 4: RH Dual Safety Belt Buckle Installation Note
1. The anti-rotation tab must be correctly aligned in the seat frame for correct installation.
60/40 Bench
REAR SAFETY BELT - SECOND ROW, 60/40 BENCH
Safety Belt Bolt Bit
SPECIAL TOOL(S)
REMOVAL
WARNING: All safety belt assemblies including retractors, buckles, shoulder belt height adjusters (if so equipped) child safety seat tether
attachments and attaching hardware should be inspected after any collision. All belt assemblies should be replaced unless a qualified technician
finds the assemblies show no damage and operate properly. Belt assemblies not in use during a collision should also be inspected and replaced if
either damage or improper operation is noted.
1. To access the second row 40 percent safety belt buckle, remove the seat from the vehicle.
2. To access the second row outboard safety belt retractors, remove the rear quarter trim panels.
3. To access the second row center safety belt retractor, remove and disassemble the 60 percent seat backrest.
4. To remove the individual components, only carry out the listed steps.