Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
With all the restraint system diagnostic tools removed prove out the supplemental restraint system (SRS). See: Air Bag Systems/Air Bag(s)
Arming and Disarming/Service and Repair/Prove Out Procedure
Item 3: Front Impact Severity Sensor Installation Note
1. Align the locator tab of the front impact severity sensor mounting bracket to the opening in the lower radiator support sheet metal.
First Row, B-Pillar
SIDE IMPACT SENSOR - FIRST ROW, B-PILLAR
Special Tool(s)
SPECIAL TOOL(S)
REMOVAL
WARNING: Vehicle sensor orientation is critical for correct system operation. If a vehicle equipped with an air bag supplemental restraint
system (SRS) is involved in a collision, inspect the sensor mounting bracket and wiring pigtail for deformation. Replace and correctly position
the sensor or any other damaged supplemental restraint system (SRS) components whether or not the air bag is deployed.
NOTE:
