Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
Reactivate the supplemental restraint system (SRS).
6. Connect the battery ground cable.
7. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure
to remove could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). See: Air Bag Systems/Air Bag(s)
Arming and Disarming/Service and Repair/Prove Out Procedure
8. Check the active restraint system for correct operation.
Item 7: Side Impact Sensor Installation Note
1
Align the locator tab of the second row side impact sensor mounting bracket to the opening in the C-pillar sheet metal.
Item 3: Safety Belt Anchor Installation Note
1. NOTE: Make sure the safety belt webbing is not twisted prior to installation.
Position the safety belt anchor and install the bolt.
