Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
Alignment: Service and Repair
Rear Camber Adjustment
Rear Camber Adjustment
1. NOTE: The lower arm rearward mounting bolt has a set shim that must be removed and replaced with a washer (W-705040-S426) to allow for
the adjustment of the arm in the frame slot.
Remove the nut and the set shim.
^
Discard the nut and set shim.
-
Install the washer (W-705040-S426) and the nut and snug the nut.
2. NOTE: A prybar may be used between the lower arm and the frame pocket to aid in moving the arm outward.
To decrease the camber, move the lower arm outward.
3. NOTE: Adjustable pliers may be used to aid in moving the arm inward.
To increase the camber, move the lower arm inward.