Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
Suspension Strut / Shock Absorber: Service and Repair
Removal and Installation
Front
Shock Absorber and Spring Assembly-Front
1. Remove the wheel and tire assembly.
2. Remove the components in the order indicated in the following illustration and table.
3. To install, reverse the removal procedure.
Item 5: Shock Absorber and Spring Assembly Removal Note
1. For additional information on the disassembly and assembly of the shock absorber and spring assembly, refer to Shock Absorber and Spring
Assembly.
Item 3: Shock Absorber-to-Lower Arm Bolt Installation Note
1. Do not tighten until the installation procedure is complete and the weight of the vehicle is resting on the wheel and tire assemblies.
Rear
Shock Absorber and Spring Assembly-Rear
1. Remove the wheel and tire assembly.
2. Remove the components in the order indicated in the following illustration and table.
