Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
1. Install and assemble the manual valve inner lever and parking pawl actuating rod as shown.
Item 3: Manual Control Lever Shaft Installation Note
1. CAUTION: Align the flats on the manual valve inner lever with the flats on the manual control lever shaft.
Align the flats on the manual valve inner lever with the flats on the manual control lever shaft. Install the manual valve inner lever and parking
lever actuating rod onto the manual control lever shaft.
Item 4: Manual Control Lever Inner Nut Installation Note
1. Install the manual valve inner lever onto the manual shaft and loosely install the nut.
Item 5: Manual Control Lever Shaft Retaining Pin Installation Note
1. CAUTION: Use care not to damage the fluid pan rail surface when installing the retaining pin.
