Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
Item 5: Transmission Fluid Pan Screws Installation Note
1. Tighten the screws in a crisscross sequence.
Item 4: Solenoid Body Harness Electrical Connector Installation Note
1. CAUTION: Damage will occur to the solenoid body assembly if the screw is tightened above the specification.
NOTE: Always install new O-ring seals on the vehicle harness connector.
NOTE: Clean the area around the connector to prevent contamination of the solenoid body connector.
NOTE: Use petroleum jelly to lubricate the O-ring seals to aid in the installation process.
Install and lubricate new O-ring seals on the transmission connector and connect the connector.
