Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
Transmission Speed Sensor: Service and Repair
Intermediate Shaft Speed Sensor
Intermediate Shaft Speed Sensor
NOTE: Lubricate the sensor O-ring with petroleum jelly prior to installing the sensor.
1. On 4x4 vehicles, remove the front driveshaft.
2. For 4x2 vehicles, with the vehicle in PARK, position on a hoist.
3. Remove the shift cable and bracket.
4. Remove the components in the order indicated in the illustration and table.
5. To install, reverse the removal procedure.
Item 3: Speed Sensor Removal Note