Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
Lubricate the seals and install the transmission fluid filter.
Item 7: Transmission Fluid Pan Installation Note
1. Install the transmission fluid pan and gasket and loosely install the screws.
Item 6: Transmission Fluid Pan Screws Installation Note
1. Tighten the screws in a crisscross sequence.
Item 5: Solenoid Body Harness Electrical Connector Installation Note
1. CAUTION: Damage will occur to the solenoid body assembly if the screw is tightened above specification.
NOTE: Always install new O-ring seals on vehicle harness connector.
NOTE: Clean the area around connector to prevent contamination of the solenoid body connector.
NOTE: Use petroleum jelly to lubricate the O-ring seals to aid in the installation process.
Install and lubricate new O-ring seals on the transmission connector and connect the connector.
Solenoid Body Assembly
Solenoid Body Assembly
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its adaptive
