Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
6. To install, reverse the removal procedure.
Item 2 and 4: Driveshaft Flange Yoke Removal Note
1. CAUTION: The driveshaft flange fits tightly on the rear axle pinion flange pilot and the transfer case output flange. Never hammer on the
driveshaft or any of its components to disconnect the driveshaft flange from the mating flange. Pry only in the area shown, with a suitable tool, to
disconnect the driveshaft flange.
Using a suitable tool as shown, disconnect the driveshaft flange.
