Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
1. NOTE: Install new U-joint bolts. If new bolts are not available, coat the threads of the original bolts with threadlock and sealer.
Install the new U-joint bolts.
Item 2: CV Joint Installation Note
1. CAUTION: The can (domed CV joint housing cover) is pressed into the CV joint housing at the factory. When housed correctly, the can will
appear as shown in the cut-away illustration (top box). Do not reseat the can in the CV joint housing if the can's flange is above the CV joint
housing as shown in the cut-away illustration (bottom box). Install a new driveshaft.
Verify that the can flange is housed correctly in the CV joint housing as shown in the cut-away illustration (top box). Install a new driveshaft if the
can flange is not housed correctly.
Item 1: CV Joint Bolts Installation Note
1. CAUTION: Tighten the bolts evenly in a cross pattern in the sequence shown, or damage will occur to the CV joint.
NOTE: Install new washers and bolts. If new bolts are not available, coat the threads of the original bolts with threadlock and sealer.
Install the new washers and bolts. Tighten the bolts evenly in a cross pattern as shown.
