Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
1. Using the special tools, install the RH halfshaft bearing.
2. Using the special tools, install the LH halfshaft bearing.
3. Using the special tools, install the halfshaft seals.
Item 6: Front Halfshaft Assembly Installation Note
1. Lubricate the outboard CV joint.
1
Pack the outboard CV joint with 185 grams (6.53 oz) of grease.
^
One-third of the grease must be installed in the joint with the remainder placed in the boot.
2
Spread the remaining grease evenly inside the boot.
