Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
10. Using the special tool, install the boot clamps
11. CAUTION: On the RH side, check the retainer circlip engagement after reseating the axle shaft and after installing the halfshaft in the axle. On
the LH side, check the retainer circlip engagement after installing the halfshaft in the axle. When seated, the retainer circlip will lock the axle shaft
and the inboard CV joint housing to the axle.
Install a new retainer circlip
Item 2: Front Axle Wheel Hub Retainer Installation Note
1. CAUTION: Never use power tools to tighten the front axle wheel hub retainer.
Install a new front axle wheel hub retainer.
