Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
1. NOTE: Be sure the crankshaft rear sealing surface is clean and free of any rust or corrosion. To clean the-crankshaft rear sealing surface, use
extra-fine emery cloth or extra-fine steel wool with metal surface cleaner.
Lubricate the crankshaft rear oil seal with clean engine oil and install the special tool.
^
Lubricate the crankshaft rear oil seal with motor oil before installation.
2. Using the special tool, install the crankshaft rear oil seal.
Item 1: Flexplate Bolt Installation Note
1. Install the flexplate. Tighten the bolts in two stages in the sequence shown.
^
Stage 1: Tighten the bolts to 13 Nm (10 inch lbs.).
^
Stage 2: Tighten the bolts to 71 Nm (52 ft. lbs.).
