Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
1. Move the rubber boot back to gain access to the connector.
2. Disconnect the digital TR sensor connector.
Item 6: TR Sensor Installation Note
1. CAUTION: The digital TR sensor must fit flush against the boss on the case to prevent damage to the sensor.
Install the digital TR sensor and loosely install the screws.
Item 5: TR Sensor Screws Installation Note
1. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
NOTE: The manual lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor and tighten the screws in an alternating sequence.
