Explorer AWD V6-4.0L VIN K Flex Fuel (2003)
4. Remove the 3 wiring bundle carrier fasteners from the bottom of the steering column to allow movement while removing the brake shift interlock
switch. It may be necessary to release the connectors from the multifunction switch.
5. Remove the brake shift interlock bolts.
6. Pull the brake shift interlock tab on the bottom of the column downward to help free the brake shift interlock from the column housing.
7. Break the 2 side tabs off the brake shift interlock by the white wiring connector.
8. Push the locking tab on the white connector towards the wiring to release the connector from the brake shift interlock. Be careful not to damage
the connector or wiring. If the connector does not free easily, a very small flat screwdriver may be used to help lift the locking tab.
9. Connect the wiring to the new brake shift interlock. Make sure all clips are fully engaged to prevent the connector from pulling free.
